본문 바로가기 주메뉴 바로가기

HOME  >  제조사별  >   

FPH (휴대용 스펙트럼 분석기)

주요 스펙

FPH
  • :5 kHz to 2 GHz
FPH-B3
  • :5 kHz to 3 GHz
FPH-B4
  • :9 kHz to 4 GHz
DANL
  • :-163 dBm (pre-amp on)
소비자가격
  • :7,070,000원 부터 ~
FPH 휴대용 스펙트럼 분석기
 
Spectrum Rider는 견고하고 매력적인 디자인의 다기능의 사용자 친화적 인 계측기입니다. 기본 주파수 범위는 5 kHz to 2 GHz입니다. 키-코드를 통해 3 GHz 또는 4GHz로 쉽게 측정 주파수 확장 할 수 있습니다.

구매, 기술, 렌탈 문의  이성종 과장 / 010-4812-3482 / sjlee3482@gmail.com

 
주요사양
 - 주파수 범위는 5 kHz에서 2 / 3 / 4 GHz입니다. 키 코드를 통해 업그레이드
- 견고한 RF 성능
- 배터리로 8 시간 동작가능, 백라이트 키패드, 빠른 부팅 시간,
   무반사 디스플레이, 소형 풋 프린트, 견고한 하우징
- 터치 및 제스처 작동이 가능한 대형 컬러 디스플레이
- 항공 우주 및 방위, 무선 통신, 방송, 스펙트럼 규제 기관 및 교육과 같은
   다양한 산업 분야의 기능 및 옵션
 - 소프트웨어 키 코드를 통해 모든 옵션을 쉽고 비용 효율적으로 업그레이드
 
- 기본 3년 무상보증 (배터리 1 년)
 
 
특징 및 장점
 
현장에서 뛰어나다.
   - 가볍고 작고 긴 배터리 수명
   - 다양한 액세서리
   - 옥외용으로 설계된 무반사 디스플레이 및 백라이트 키패드
   - MIL-PRF 28800F 클래스 2와 함께 견고 함
 
연구실 측정에 우수함
   - 실험실에서의 진단을위한 견고한 RF 성능
  
- 근거리 필드 프로브 옵션을 사용한 EMI 디버깅
 
사용자에게 친숙한 인터페이스
  - 터치 스크린에서 스마트 폰과 유사한 동작으로 사용하기 쉽습니다.
  - 구성 개요 메뉴
  - 채널 테이블을 사용하여 주파수 설정
 
미래 준비
   - 소프트웨어 업그레이드가 가능한 주파수 범위
  
- 다양한 산업, R & D 및 교육 분야의 다용도 활용
  
- 소프트웨어 키 코드를 통한 모든 옵션의 손쉬운 업그레이드
 
선택적 소프트웨어 응용 프로그램
  
- 전력 센서로 전력 측정
  
- 내부 채널 전력계
  
- 파워 센서로 펄스측정
 
측정 위자드를 통한 생산성 증대
  
- 단순 측정
  
- 재현성 있고 빠른 측정
 
후 처리 및 원격 제어
  
- 측정 후 처리 및 문서화를위한 Instrument View 소프트웨어
  
- LAN 또는 USB를 통한 원격 제어

구매, 기술, 렌탈 문의  이성종 과장 / 010-4812-3482 / sjlee3482@gmail.com

FPH 시리즈 스펙트럼 분석기 사양 (Specifications)
 
주파수
Frequency range base unit 5 kHz to 2 GHz
주파수 범위 with FPH-B3 option 5 kHz to 3 GHz
  with FPH-B3 and FPH-B4 option installed 5 kHz to 4 GHz
주파수 분해능   1 Hz
측정 대역폭 분해능   1 Hz to 3 MHz in 1/3 sequence
Spectral purity SSB phase noise   f = 500 MHz
  30 kHz < ?88 dBc(1 Hz), typ. ?95 dBc(1 Hz)
  100 kHz < ?98 dBc(1 Hz), typ.?105 dBc(1 Hz)
  1 MHz < ?118 dBc(1 Hz), typ. ?125 dBc(1 Hz)
DANL                              0 dB RF attenuation, 50 Ω termination, RBW = 100 Hz, VBW = 10 Hz, sample detector, log scaling, tracking generator off, normalized to 1 Hz
  주파수 preamplifier = off
  1 MHz to 10 MHz < -135 dBm, typ. -142 dBm
  10 MHz to 1 GHz < -142 dBm, typ. -146 dBm
  1 GHz to 4 GHz < -140 dBm, typ. -44 dBm
  주파수 preamplifier = on
  1 MHz to 10 MHz < -150 dBm, typ. -160 dBm
  10 MHz to 3 GHz < -158 dBm, typ. -163 dBm
  3 GHz to 4 GHz < -156 dBm, typ. -161 dBm
Third-order intercept (IP3) intermodulation-free dynamic range, signal level 2 × -20 dBm, RF attenuation = 0 dB, RF preamplifier = off
  f = 1 GHz +7 dBm (meas.)
  f = 2.4 GHz +10 dBm (meas.)
종합 측정 불확도  95 % confidence level, +20 °C to +30 °C, SNR > 16 dB, 0 dB to -50 dB below reference level, RF attenuation auto
  10 MHz ≤ f ≤ 4 GHz < 1.25 dB, typ. 0.5 dB
디스플레이       
분해능   WVGA, 800 × 480 픽셀
베터리                               리튬이온베터리
베터리 용량 HA-Z306 72 Wh
전압   11.25 V
사용시간 HA-Z306 8 h
크기 W × H × D 202 mm × 294 mm × 76 mm
(8.0 in × 11.6 in × 3 in)
무게   2.5 kg (5.5 lb)

구매, 기술, 렌탈 문의  이성종 과장 / 010-4812-3482 / sjlee3482@gmail.com

FSH 시리즈 휴대용 스펙트럼 분석기 옵션사항
 
드웨어/소프트웨어 옵션                
 - FPH-B3       Spectrum Analyzer Frequency Upgrade 2 GHz to 3 GHz                        
 - FPH-B4       Spectrum Analyzer Frequency Upgrade 3 GHz to 4 GHz requires FPH-B3
 - FPH-B22       Spectrum Analyzer Preamplifier
 - FPH-K7       Analog Modulation Analysis AM/FM                        
 - FPH-K9       Power Sensor Support                        
 - FPH-K19       Channel Power Meter                        
 - FPH-K29       Pulse Measurements with Power Sensor                        
 
 
악세서리 옵션
- HA-Z340       GPS Receiver for R&S?Spectrum Rider                        
 - HA-Z302       Car Adapter for cigarette lighter. The car adapter is suitable for both the instrument
                      and the HA-Z303 external battery charger. Reduces instrument rating to CAT III
                      300 V / CAT II 600 V during charging.
 - HA-Z303       Battery Charger for HA-Z306. The battery charger is to be used for charging an additional
                      battery outside the instrument. The internal battery is charged by the instrument itself.
 - HA-Z306       Lithium Ion Battery Pack, 6.4 Ah              
 - HA-Z220       Carrying Bag  soft carrying bag
 - RTH-Z4         Hard Shell Protective Carrying Case
 - FSH-Z36        Headphones
 - TS95A16        GSM/UMTS/CDMA Antenna with magnetic mount, 850/900/1800/1900/2100 band, N connector
 - HA-Z350       Logarithmic Periodic OEM Antenna, 700 MHz to 4 GHz
 - FSH-Z320      RF Cable (length 1 m), N male/N female for FSH-K41 option, DC to 8 GHz
 - FSH-Z321      RF Cable (length 3 m), N male/N female for FSH-K41 option, DC to 8 GHz
 - RAM            Matching Pad 50/75 Ω bidirectional, 0 Hz to 2.7 GHz,
                     N (f)/N (m) connectors, load capacity 2 W, L section
 - RAZ             Matching Pad 50/75 Ω, series resistor 25 Ω
 - FSH-Z38       Matching Pad 50/75 Ω, L section, N to BNC bidirectional,
                      0 Hz to 1 GHz, BNC female/N male connectors, load capacity 1 W
 - RDL50           High-Power Attenuator, 50 W 0 Hz to 6 GHz, 20 dB
 - RBU100         High-Power Attenuator, 100 W 0 Hz to 2 GHz
                      for E and H near-field emission measurements with test receivers and spectrum analyzers
 - HA-Z211       Spare USB Cable
 - HA-Z210       Spare LAN Cable
 - HA-Z301       Spare Power Supply, incl. mains plug for EU, GB,US, AUS, CH Sensors

                      Cost-effective power measurement solution for production
                      Measurement range: -60 dBm to +20 dBm,
                      Frequency range: 10 MHz to 8 GHz, 
                      N connector

                      Cost-effective power measurement solution for production
                      Measurement range: -60 dBm to +20 dBm,
                      Frequency range: 10 MHz to 18 GHz,
                      N connector

                      Fast, accurate and packed with features for CW and modulated signals
                      Measurement range: -57 dBm to +33 dBm, 
                      Frequency range: 10 MHz to 18 GHz,   
                      N connector

                      Fast, accurate and packed with features for CW and modulated signals
                      Measurement range: -47 dBm to +42 dBm, 
                      Frequency range: 10 MHz to 18 GHz, 
                      N connector

                      Fast, accurate and packed with features for CW and modulated signals
                      Measurement range: -42 dBm to +45 dBm, 
                      Frequency range: 10 MHz to 18 GHz, 
                      N connector

                      Fast, accurate and packed with features for CW and modulated signals
                      Measurement range: -67 dBm to +20 dBm, 
                      Frequency range: 50 MHz to 40 GHz, 
                      2.92 mm connector
 - NRP-Z51       Thermal Power Sensor
                      Most accurate power measurements for reference applications and use in calibration labs
                      Measurement range: -35 dBm to +20 dBm 
                      Frequency range: DC to 18 GHz
                      N connector

 - NRP-Z52       Thermal Power Sensor
                      Most accurate power measurements for reference applications and use in calibration labs
                      Measurement range: -35 dBm to +20 dBm, 
                      Frequency range: DC to 33 GHz,
                      3.5 mm connector

                      Most accurate power measurements for reference applications and use in calibration labs
                      Measurement range: -35 dBm to +20 dBm, 
                      Frequency range: DC to 40 GHz, 
                      2.92 mm connector

                      Most accurate power measurements for reference applications and use in calibration labs
                      Measurement range: -35 dBm to +20 dBm, 
                      Frequency range: DC to 50 GHz, 
                      2.4 mm connector

                      Most accurate power measurements for reference applications and use in calibration labs
                      Measurement range: -35 dBm to +20 dBm, 
                      Frequency range: DC to 67 GHz, 
                      1.85 mm connector

                      Most accurate power measurements for reference applications and use in calibration labs
                      Measurement range: -35 dBm to +20 dBm, 
                      Frequency range: DC to 110 GHz, 
                      1.00 mm connector

                      Fast, accurate and packed with features for CW and modulated signals
                      Measurement range: -67 dBm to +20 dBm, 
                       Frequency range: 50 MHz to 50 GHz, 
                       2.4 mm connector

 - NRP-Z81       Wideband Power Sensor
                      Time domain analysis and automatic pulse analysis for radar applications and universal use
                      Measurement range: -60 dBm to +20 dBm, 
                      Frequency range: 50 MHz to 18 GHz,
                      N connector

 - NRP-Z85       Wideband Power Sensor
                      Time domain analysis and automatic pulse analysis for radar applications and universal use
                      Measurement range: -60 dBm to +20 dBm, 
                      Frequency range: 50 MHz to 40 GHz,
                      2.92 mm connector

 - NRP-Z86       Wideband Power Sensor
                      Time domain analysis and automatic pulse analysis for radar applications and universal use
                      Measurement range: -60 dBm to +20 dBm,
                       Frequency range: 50 MHz to 40 GHz,
                       2.4 mm connector

                      Time domain analysis and automatic pulse analysis for radar applications and universal use
                      Measurement range: -60 dBm to +20 dBm,
                      Frequency range: 50 MHz to 44 GHz,
                      2.4 mm connector

 - NRP-Z91       Average Power Sensor
                      Accurate average power measurements for EMC applications
                      Measurement range: -67 dBm to +23 dBm, 
                      Frequency range: 9 kHz to 6 GHz, 
                      N connector

 - NRP-Z92       Average Power Sensor
                      Accurate average power measurements for EMC applications
                      Measurement range: -57 dBm to +33 dBm,
                      Frequency range: 9 kHz to 6 GHz, 
                      N connector

 - NRP8S          Three-Path Diode Power Sensor
                      For USB operation
                      Measurement range: 100 pW to 200 mW
                      Frequency range: 10 MHz to 8 GHz
                      N (m) connector

                      For USB and LAN operation
                      Measurement range: 100 pW to 200 mW
                      Frequency range: 10 MHz to 8 GHz
                      N (m) connector 

                      For USB operation
                      Measurement range: 100 pW to 200 mW
                      Frequency range: 10 MHz to 18 GHz
                      N (m) connector

                      For USB and LAN operation
                      Measurement range: 100 pW to 200 mW
                      Frequency range: 10 MHz to 18 GHz
                      N (m) connector

                      For USB operation
                      Measurement range: 100 pW to 200 mW
                      Frequency range: 10 MHz to 33 GHz
                      3.5 mm (m) connector

                      For USB and LAN operation
                      Measurement range: 100 pW to 200 mW
                       Frequency range: 10 MHz to 33 GHz
                       3.5 mm (m) connector

                      For USB operation
                      Measurement range: 100 pW to 100 mW
                      Frequency range: 50 MHz to 40 GHz
                      2.92 mm (m) connector

                      For USB and LAN operation
                      Measurement range: 100 pW to 100 mW
                      Frequency range: 50 MHz to 40 GHz
                      2.92 mm (m) connector

                      For USB operation
                      Measurement range: 100 pW to 100 mW
                      Frequency range: 50 MHz to 50 GHz
                      2.4 mm (m) connector

                      For USB and LAN operation
                      Measurement range: 100 pW to 100 mW
                      Frequency range: 50 MHz to 50 GHz
                      2.4mm (m) connector

 - NRP33SN-V   Three-Path Diode Power Sensor                       
                      TVAC compliant USB and LAN Power Sensor
                      Measurement range: 100 pW to 200 mW
                      Frequency range: 10 MHz to 33 GHz
                      3.5 mm (m) connector

Recommended Extras
 - NRP-Z4         USB Adapter (passive)
                      For all NRP-Z sensors. 
                      The NRP-Z4 passive USB adapter provides all basic functions, as it handles
                      the transmission of settings and measurement data as well as the power supply
                      of the sensor via the USB bus. 
                      Available cable lenghths: Available cable lengths: 2.0m, 0.5m and 0.15m
                       Available cable length for panel-mount: 1m

 - NRP-ZKU       USB Interface Cable, length: 1.5 m
                      to connect NRPxxS/SN sensors to the Spectrum Rider
LIST